Enfonic Posted December 19, 2013 Report Share Posted December 19, 2013 Our SymphoniePLUS3 logger has a #40C anemometer and #200P vane. It's been logging every 10mins for over 2 weeks however, large chucks of time have no wind speed data (but do have direction data). We cannot identify any problems as it seem to be working at the moment, so we suspect a software error. We can send you the raw files if necessary but has this problem been seen before? Is there a solution to fix our historic data and/or ensure that it doesn't happen again? Br, Gary Enfonic Ltd Link to comment Share on other sites More sharing options...
Drew Lepple Posted December 19, 2013 Report Share Posted December 19, 2013 Gary, Thank you for your message. From the data you have sent me it appears that the #40 C anemometer must have a connection problem somewhere. For a sensor to have no data, then all of the sudden show some data, then go flat line again, usually means a connection issue is occurring. Check the wires at the sensor and the logger to make sure everything is ok. Also check to make sure the wiring panel is pushed in all the way into the logger. Unfortunately there is no way to capture any data that may have been lost in this situation. If the sensor is not reporting any data, then there is no data to capture. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.