vinhquyen Posted August 4, 2014 Report Share Posted August 4, 2014 Hello Sir, I have a sensor. You can see it at link : http://www.youngusa.com/products/7/5.html With this sensor, it measures Wind Speed and Wind Direction. I want to connect to SymphoniePlus3. I think that i need Symphonie SCM Card for RMY Wind Monitor, Anemometer for connecting. I am not sure that SymphoniePlus3 connect the sensor R.MY Please give me some advice Thank you vinhquyen Link to comment Share on other sites More sharing options...
David Carlson Posted August 4, 2014 Report Share Posted August 4, 2014 Yes, the Wind Monitor is compatible with all Symphonie type loggers, including SymphoniePLUS3 The direction output can connect directly to channels 7 or 8, as it is a potentiometer type output, similar to the 200P wind vane. You can also use the 200P SCM in any of the open Flex/Analog channels as well. The speed output of the sensor should route in one of the Flex channels (4 - 6) with the Wind Monitor SCM: Item 3746. http://www.renewablenrgsystems.com/products/3746/scm-card-rmyoung-wind-monitor.aspx Link to comment Share on other sites More sharing options...
vinhquyen Posted August 4, 2014 Author Report Share Posted August 4, 2014 Thank you very much Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.