NRG Tech Support Forums

Browse by Tags

Re: Turn off the logger?

You can remove the MMC and then remove the D-cell batteries and disconnect the iPack, and the Symphonie will stop logging.

Posted to Symphonie Manual (Forum) by Julia Austin on 05-12-2011
Turn off the logger?

Hi there, We are decommissioning our NRG TallTower / SymphoniePLUS wind monitoring station. In the SymphoniePLUS manual I can't find how to turn off the logging - is it possible? Cheers, Dominic

Posted to Symphonie Manual (Forum) by Dominic E on 05-06-2011
Symphonie status and iPack last call / internet error codes

Hi there, It looks like I have a system that is not sending all the data vie the iPack and I am troubleshooting it remotely. I would like to check two things: 1) The logger status 2) The iPack last call / internet error codes Logger Status I have received 3 of 8 emails expected and I am wondering if...

Posted to Symphonie Programming and Specifications (Forum) by Dominic E on 02-07-2011
Missing data

Hello, I'm doing a wind analysis for a project. The wind data were collected for a period of 13 months. The data looked fine, however there are lots of missing data, once a week the logger stopped recording data at 03:50am until 7pm of the next day. This situation happens during 27 weeks consecutive...

Posted to Symphonie Programming and Specifications (Forum) by Maria Vazquez on 11-17-2009
Re: Programming Cr1000 datalogger advice

Hi James, That is a good question. Starting with our 9000 series loggers (9200, 9210) we standardized our sampling rate to 2 seconds, recording 10 minute averages of those samples. Since then, this has been regarded as the de facto standard for wind measurement campaigns around the world. For wind turbine...

Posted to Startup Q&A (Forum) by David Carlson on 05-07-2009
Logger Data/Timestamp

Hello, When our symphonie logger was first installed, the date/time was accidentally set an hour ahead. I was able to correct it today, but we have almost a month's worth of raw data with an incorrect timestamp. What is the best way to correct this? Thanks, Scott Hendricks

Posted to Symphonie Programming and Specifications (Forum) by Scott on 02-04-2009
Re: Connecting Digital anemometers to a Symphony Logger

Hi Vozone, Which type of Theis anemometer is it? Some of them will work with the Digital Anemometer SCM card in channels 4, 5, and 6. You're right about requiring 12V. An iPack can be used to power the sensor. With the iPack connected, you can draw power for the sensor from the Sensor Power terminal...

Posted to Symphonie Programming and Specifications (Forum) by David Carlson on 01-08-2009
Connecting Digital anemometers to a Symphonie Logger

Hi, I am trying to connect a Thies Digital anemómeter to a Symphony Logger. The SMC card is installed in the logger and all the wires are connected. One first problem is that this instrumento requires a 12V power line. The Logger does have a place to attach the power for 12V, but since it operates on...

Posted to Symphonie Programming and Specifications (Forum) by Vozone on 01-08-2009

Page 1 of 1 (8 items)

Tech Forum

Browse by Tags