Jump to content

Programming Cr1000 datalogger advice


james@kbk.co.za

Recommended Posts

Hi,

I need some advice please.

I am using a Cr1000 datalogger with 60 meter NRG tower with the 7 NRG windspeed and direction sensors. How often must I measure each and how often must I log the average of those measurments to be acceptable for further analysis ?

Sincerely

James 

 

 

Link to comment
Share on other sites

Hi James,

That is a good question.  Starting with our 9000 series loggers (9200, 9210) we standardized our sampling rate to 2 seconds, recording 10 minute averages of those samples.

Since then, this has been regarded as the de facto standard for wind measurement campaigns around the world. 

For wind turbine power performance, 1 minute averaging is preferred.

All the best,
Dave

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...