Jump to content


  • Content Count

  • Joined

  • Last visited

  1. Unless things have changed recently, the binary data is in a proprietary format, however, the SDR software can batch convert to ASCII files for further processing. George Friend President Prodigium, LLC george.friend@prodigium.us
  2. Personally, my approach has been to leave the loggers set to factory defaults for the sensors (at least the "normal" ones - anemometers, vanes, temp). That way, you don't have to worry that someone tweaked the settings in the logger, or got them wrong. As to how to "unscale" the data, it's my understanding that you just subtract the offset and then divide by the slope. The SDR does value * slope + offset = scaled value. So the inverse would be scaled value - offset / slope = value By storing the values using the default values in your database (either unscaled or the "normal" values for slope/offset), you can always back them out and then re-scale as necessary. I'm doing this right now for one of my clients - we did post-calibration of some anemometers and we're working on formulaically applying the change in slope/offset to the data (assuming that any change in calibration occurred over the life of the anemometer). George Friend President Prodigium, LLC george.friend@prodigium.us
  3. I assume you've already gotten the answer to this, but thought I'd reply for the benefit of others. If you don't have cell coverage available, you'll need to either use a Satellite iPack, or if you can get a land-line installed, there is an iPack module for that as well. George Friend President Prodigium, LLC george.friend@prodigium.us
  4. I realize this is an old thread, but I wanted to chime in. My company manages the entire data collection process for a wind energy developer. We started using the AMPS iPacks as soon as they were released, and struggled a LOT in the beginning. Additionally, we experienced changes by the carriers causing problems (had one situation where it would NOT work for 3-6 months, but would work a mile up the road, but then would start working as mysteriously as it started). NRG has been as helpful as they could in working through those issues, but there's only so much that can be done. The carriers tend not to care about data. We also tested some GSM iPacks. While the reliability of them seems to be much better than AMPS, setup was still a bit of a headache (just getting AT&T to call back). So.. We've not standardized on satellite iPacks. I was udderly AMAZED at how easily these units deployed. I converted 13 units in a very short amount of time and other than a few human-created problems (typos), things went off without a hitch. The MItchMail service is reliable and has been a good middle-man when we've experienced in-house infrastructure changes that caused problems with delivery. Lastly, it's very rare to have any transmission problems now. My client is in the northeastern US, so winters can get cold and getting to the sites becomes impractical. We had "zero" trips this winter due to iPack failures. Historically, we'd have a couple for one reason or another. If you can afford the higher monthly costs and the cost of the equipment, you'll more than save that in hassle. George Friend President Prodigium, LLC george.friend@prodigium.us
  • Create New...