Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by metmast

  1. Hi Sir Drew, I already sent you the .ipk file. My email address is pnr@airnergyphils.com. Thanks.
  2. Hi Sir/Ma'am We are now again having issue on data transmission thru email of both our iPack. The cell signal is good but call function still fails. What other suggestions you can give us to troubleshoot the problem. We already resolve the problem a few months ago by replacing sim card with another service provider but it happened again. I hope you can help us with this problem.
  3. This message is not popping out again when viewing files from the raw wind data files. And lately, the logger is sending a lot of IPACK.GPS files. How can we resolve this.
  4. Hi Drew, When I view raw wind data files, It always ask if I want to change my hardware revision from 034-035-057 to 034-035-062. What does it mean?
  5. Hi Guys, Can somebody answer my questions here. Is the firmware iPackGPS_v62 compatible with symphonie plus data logger? If so, do we need to upgrade any other software after upgrading the firmware? Thank you guys!
  6. DTECH brand USB to serial cables are what we are using and we have an CD installer of the software but still we can not communicate the iPack. What about the CATA Cable DB9 (M) to DB25 (M) cable? Do this cable need an installer? USB to serial cable seems ok because the computer is able to detect the USB cable.
  7. We already replaced the iPack battery when it fall below 10VDC and the logger is not detecting the iPack. Its current voltage reading is 13.398 VDC. As for the cables, we already have the software because the cable that we purchase comes with a CD installer. We already saw COM3 selection on the drop down button of the "COMM PORT" but still it fails to communicate with the iPack. What else do you think could be the problem?
  8. Hello, Thank you. I already solved the problem by switching the sensor from analog channel 10 to a spare flex channel 5. The problem may be the channel itself. The only problem we did not solve is the data transmitting of iPack thru email. iPack is not sending email for about 3 months. The sim card is good as per checking. We can not download the ipk file on the iPack because of communication failure. We dont know whether we are using the wrong programming cables or we are have skipped a step of the process. The version of our NRG Symphonie Data Retriever is 7.07.06 because the one of the
  9. Can somebody advise me how to troubleshoot a temperature sensor of data logger. I already perform the voltage check and the resulting output voltage converted into degrees is within 2 degrees of the reference temperature prob meaning it is still good. I did not perform the current check because of problem with my digital multitester and it is very difficult for it to read a very little amount of current like 300 micro amperes and below. I planning to put the sensor into another slot with its SCM. i hope somebody can help me.Thank you
  • Create New...