Jump to content

DR01/DR02 First class pyrheliometer


vinhquyen

Recommended Posts

Hello the NRG,

 

I have DR01/DR02 first class pyrheliometer. In the manual, They have analogue millivolt output which can be used in conjunction with the SymphoniePro. Please see the manual at attached file

 

I am not sure when i connect the DR01/DR02 to  SymphoniePro, the measurement is good or not good. 

 

Please share your experience with me ?

 

Thank you very much

 

vinhquyen

Link to post
Share on other sites

Hello Vinhquyen,

 

Thank you for your message.

 

The output of the sensor will be in W/m^2. Below are two examples of how the output of a Direct Normal Irradiance (DNI) pyrheliometer sensor in relation to a fixed pyranometer.

 

Please note that the pyrheliometer in this example is a CHP-1 (green line) and the pyranometer is a CMP22 (red line). Although the sensor brand may be different, you would expect to see similar profile with a pyrheliometer and a pyranometer.

 

gallery_2219_5_14101.png

 

gallery_2219_5_15655.png

 

Data exported from: https://www.nrel.gov/midc/srrl_bms/.

 

Please let me know if you have any questions.

 

Pearse

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...