Jump to content
Sign in to follow this  
Julia Austin

Minimum wind speed for TIs (turbulence intensities)

Recommended Posts

 Q: Is the Minimum wind speed for TIs of 4.5 m/s shown in SDR's "Editing Wind Rose" screen a default value?  If so, can it be changed?

 A:  Yes, 4.5 m/s is the default lower limit in SDR.  While it is possible to change the mimimum value, raising it could skew TI (turbulence intensity) calculations (i.e. if you only calculate TIs based on higher wind speeds, there may be higher average TI values, but in fewer directions because some of the data will be eliminated from the TI calculations). 

Lowering the limit is not recommended because below 4.5 m/s is close to the threshold speed for wind turbines.  While the lower range of wind speeds is not of much interest for wind energy measurements, eliminating them could artificially inflate the overall TI averages, which are very important in choosing an appropriate wind turbine.

 


Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...