Jump to content
Sign in to follow this  
TATIANA

Scale factor and offset

Recommended Posts

Hello, <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

 

The Load Defaults button can be used to load a default scale factor and offset for the type of sensor shown in the Sensor Type field , but?are applied scale factor and offset type  in instantaneous values (1 second) sampling or in average data over a 10-minute period?

Some values download in the SymphoniePLUS3 logger and the Symphonie Data Retriever (SDR) software are less than default offset values (for example, anemometer value: 0.02)

Thanks,

 

Share this post


Link to post
Share on other sites

All recorded data (as in on the SD card) are raw, unscaled values.

This means that changes can be made to the scaling without affecting the recorded data.

The real-time view of data on the loggers screen is meant as a reference. You may find slight discrepancies in the displayed values on the order of 0.02 m/s.

I hope that helps,

Dave

Share this post


Link to post
Share on other sites

Hello,

<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

Is applied transfer function to values of 1second to useful units of measure (m/s) or are all recorded data as Frequency values?

If transfer function is applied?.when the measured value is 0 (1second value)?is applied transfer function also?

Standard deviation of wind speed; which method do your logger use to calculate this?

Thanks,

 

Share this post


Link to post
Share on other sites

1) All 1-second samples are recorded as pulse counts; these are averaged and stored as raw pulse count information every ten minutes

2) Our SD calculations for wind speed are pretty straight ahead. We're essentially doing a one-pass SD calculation.

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...