Jump to content
Sign in to follow this  
smullin

RISO Anemo Data in symphonie data retriever

Recommended Posts

Hi there.

We have recently installed a first claso RISO anemo, and we are having some trouble regarding the data exported by the SDR. Basically the wind speed measured exported by the SDR is not adjusted with the scale factor configured for its corresponding channel in the site archive (0.765).

Shouldn?t the data exported from the SDR be adjusted automatically? despite de fact is a RISO anemo and not a NRG?

If I take a look at a RWD archive, scaled using settings from Logger, works fine, and the adjustment / correction is made... there is a diffrerence between the data scaled using settings from Logger, with data scaled using settings from Site. But this correction is not made or considered when exporting data with de SDR.

chanel 4, where RISO anemo is installed, has its scale factor and offset configured in the sensor archive sector, in its corresponding site archive (.nsd).

Thks a lot

Rgds

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...