Jump to content

Support Bulletin 008, 22 May 2008


Recommended Posts



I am looking at a support bulletin from (22 May 2008) and in this bulletin, it explains of problems associated with an epoxy used in the anemometer that could cause a sensor to under-report wind speed. This involved leaking and interfering with the bearing operations, causing the bearing to prematurely fail. The business I work for is looking to buy a large quantity of the anemometer model #40 or #40C, and is looking for assurance that the problem is fixed and what steps have been taken to fix the problem.

Thank you

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...