Jump to content

Max Wind Vane #200P deviation


Recommended Posts

Hello everybody


I'm veryfing the operational status on a wind vane #200P in order to find out the max in the sector of 10 to 350 degrees.

During my tests the maximum deviation recorded was in range of 7 to 9 degrees for the sectors of 10 to 350 degrees .

Is this deviation acceptable for measuremens performed under IEC 61400-1 standarts?


If not is there any possibility to correct the measurement afterwords?


Thanks in advance


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...