Jump to content

Can the 80m winch be used on NRG?s 60m towers?

Recommended Posts

This new winch is currently not approved by NRG for use in raising/lowering 60m XHD towers. With the 80m tower, a longer winch cable is needed to accommodate the five-part line configuration. Raising and lowering the 60m tower with this set-up would require using the outermost wraps of cable, thereby exerting more force on the winch. In addition, the three-part line configuration of the 60m tower would result in higher forces. 

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...