yutthasak Posted January 16, 2018 Report Share Posted January 16, 2018 Point mark N of W200P is 160 degree , i use SCM card for W200P,scale factor = ? Link to comment Share on other sites More sharing options...
pcorcoran Posted January 17, 2018 Report Share Posted January 17, 2018 Hello yutthasak, Thank you for your email. You should be able to use a W200P on a SymphoniePLUS data logger just like you would use a NRG 200P. It can be placed on channels 7-8 without a SCM card, or on 9-12 with a #3152 200P SCM card. You should be able to use the slope of 0.351. The offset will be based on the direction that the North mark is pointing. Please reply with any questions or email us at support@rngsystems.com. Thank you! Pearse Link to comment Share on other sites More sharing options...
pcorcoran Posted January 17, 2018 Report Share Posted January 17, 2018 Additionally - if the North notch of the sensor is 160 degrees then the offset should be 160. Slope = 0.351 Offset = 160 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.