Jump to content

Program Symphonie Loggers Using SDR

Recommended Posts

A new feature in Symphonie Data Retriever (SDR) makes it possible to program any Symphonie Logger from a connected computer.


  • Windows PC running SDR v7.01.04 or later

  • iPack Communications Kit
  • Connected iPack


  1. Connect an iPack to the logger to be programmed

  2. Connect the logger to the PC using the programming PCB included in the iPack Communications Kit
  3. Once iPack communication is established (Site > Modify iPack Settings) click File > Logger Parameter Editor

    Note: Be sure that all SCMs are installed at this time
  4. Click "Load from Logger"
  5. Make all desired changes
  6. Click "Save to Logger"

Voila! You are done.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...